Creality CR10 Smart Pro Spool Holder, 3D models download

By A Mystery Man Writer

Description

I designed this spool holder to partially replace the original one that comes with the Creality CR10 Smart Pro, it can work with other models if they have the same system.This spool holder allows the spool to always be centered and not to be "loose" or move horizontally on the roller.I made it in two different sizes so that everyone can choose the one that suits them best for the filament spool they use. One in 70mm and one in 84mm (which is the one I use).To install it you must remove the cap and the outer roller of the original support, the same bearings are used.For more reference see the images.It may take a bit of effort the first time you thread the nut onto the bolt. But after 3 or 4 times it works perfect.
I designed this spool holder to partially replace the original one that comes with the Creality CR10 Smart Pro, it can work with other models if they have the same system.This spool holder allows the spool to always be centered and not to be loose or move horizontally on the roller.I made it in two different sizes so that everyone can choose the one that suits them best for the filament spool they use. One in 70mm and one in 84mm (which is the one I use).To install it you must remove the cap and the outer roller of the original support, the same bearings are used.For more reference see the images.It may take a bit of effort the first time you thread the nut onto the bolt. But after 3 or 4 times it works perfect.

Summary Coil holder for the 3D printer Creality CR-10. It is placed on top of the frame and fixed with a small plate from below with two screws.